wheel hub puller instruction-DNT Tools-sourcing manufacturer
Front Wheel Drive Hub Puller
Used to remove the front hubs of front wheel drive vehicles.
Also can be used with D1051 slide hammer set.
A. Pressure Screw 5⁄8” x 18 Threads
B. Locking Nut
C. Web Housing
INSTRUCTIONS:
Always wear safety glasses and gloves.
1. Remove wheel, brake caliper and brake rotor.
2. Attach hub puller (A) and (C) to hub securing puller tight. See Figure 1.
3. Using a ¾” or 19mm wrench or socket, apply pressure to the hub until removed.
4. (B) locking nut is used only if a slide hammer attachment is use
