New type of bearing puller is out now
New type bearing puller is out now
What is bearing puller?
Why do I need a puller?
If a part, such as a gear, bearing or ball bearing, is so tight that you cannot loosen it with your own strength, you need a tool to help you do so. In a situation where a stuck part is installed on a machine, for example, leading to a standstill, disassembly must be fast as well as efficient, safe and gentle. Only a puller can give you that. A puller thus stands for added value, productivity and long-term service life for machines. You should also remember that necessary investments in new machines due to incorrect maintenance are always higher than the investment in the right puller. It is also important to mention that a puller is by no means an industry-specific tool, it is used in all areas of technology where downtime must be avoided.
How to choose the right puller?
In order to find the right puller for your application, you must first look at the installation conditions of the stuck part. This is roughly divided into four categories or four types of pullers:
◆If the part to be removed is seated on a shaft and is freely accessible from the outside, you can use an external puller. This type of puller is the most commonly used.
◆If the part to be removed is in a recess and not on a shaft, you need an internal puller.
◆If the part fits flat, you need a separator and a pulling device.
◆If it is a ball bearing that is mounted on a shaft and in a housing at the same time, you need a ball bearing puller.
New Type Bearing puller is OUT NOW! Welcome to order
