How to clean your fuel injectors?

1. Get prepared 

Before you even get started on the cleaning, you need to be dressed appropriately. You should only be working on a cool engine, however a fitted long sleeved top and full-length trousers will protect your skin should any accidents occur. 

You then need to decide where to clean your fuel injectors. As you’ll be using cleaning solvents, you want to choose a well ventilated area, such as a driveway or open garage. 

Having an area for your tools to be laid out and within reach can also quicken the process.

2. Locate your fuel injectors 

If it’s your first time cleaning your fuel injectors (whether for a new car or at all), you might not be sure where they’re located. They can be found in different layouts under the hood depending on the car make and model, so double check your vehicle manual if you’re uncertain.

3. Disconnect the fuel pump from fuel injectors

Locate the fuel pump at the side of the engine, and gently pull the fuel injectors to disconnect them from the pump. Then connect the fuel return line with the fuel pump in order for the gas to return to the tank when you’re cleaning.

4. Disconnect the pressure regulator 

Your car manual should indicate whether you need to do this step. If necessary, just look for the pressure regulator and the vacuum line, gently pulling to disconnect.  

5. Connect your cleaning kit to the fuel port 

Find your fuel port, then follow your cleaning kit’s directions for attaching the hose and port. 

6. Remove the fuel tank cap 

This will prevent an excessive build up of pressure.

7. Turn on your car engine 

Start your car and wait for the cleaning solution to be used up (typically 5-10 minutes).

8. Remove your cleaning kit 

Disconnect your cleaning kit from the car and re-attach the pressure regulator and the fuel pump.

9. Turn your car on 

Your car should be good to go, but listen out for any unusual noises. If you think you’ve carried out the cleaning successfully but still notice your car running abnormally, it’s best to consult a professional mechanic.

If the first method didn’t quite do the trick, you also have the option to remove your fuel injectors entirely and clean them yourself.

1. Like before, you’ll need to drain the fuel pressure by running your engine with the fuel pump disconnected. The process of removing the injectors will vary depending on the make and model of the car, so it’s best to follow the method indicated for your car.

2. With your fuel injectors safely removed, you can now clean them individually. Using a soft-bristled brush, you can apply your carburetor cleaner to the outside.

3. Use a fuel injector jumper in order to open up the fuel injector, then spray your cleaner through each side of the fuel injector.

4. Once you’re finished cleaning, you can reconnect your fuel injectors, reconnect the fuel pump, and re-start your engine.