Bearing Puller
Automotive Tools
- Wheel Bearing Removal Tool
- Ball Joint Separator
- Brake Caliper Tool
- Oil Filter Wrench
- Coil Spring Compressor
- Injector Puller
- Bush Tool
- Altermator Puller Puller
- Engine Timing Tools
- Clutch Alignment Tool
- Engine Compression Tester
- Engine Repair Tools
- Injector Seat Cutter
- Mechanic Creeper
- Oil Drain Plug Key Tool
- Fluid Oil Extractor
- Brake Bleeder
- Fuel Tank Wrench
- Wiper Arm Puller
- Motorcycle Chain Breaker
Truck Repair Tools
Mechanic Tools
Plastic Auto Tools
How to Replace a Spark Plug in a Car(car mechanic)
How to Replace a Spark Plug in a Car
1. Wait for Your Car Engine to Cool Down
Finding a spark plug that fits your vehicle is simple. What I do is go to the spark plugs page on Amazon and enter my vehicle year, make and model into their "filter by vehicle" search.
If you skip this step, you might find it impossible to remove the spark plugs from your engine without ruining the threads. This is especially true for aluminum cylinder heads. While it is possible to repair a misthreaded spark plug hole, but it is difficult and should be left to a professional.
2. Blow Out Debris Around Spark Plugs
Blow off any dust, dirt, or debris around and near the spark plug with a compressed air duster. The last thing you'll want is foreign particles falling DIRECTLY into your engine and possibly causing premature engine wear.
3. Make Sure Spark Plugs are Screwed in Straight
If spark plugs go in crooked, they can cross-thread and you will have a problem. To make sure my spark plugs are screwed in straight, I like to wiggle them a bit as I'm inserting them in. If you notice the spark plug getting tight right at the beginning... then stop, take it out and restarting the screwing process.
4. Change Spark Plugs One at a Time
It is VERY easy to get the wires all mixed up, so just play it safe and do them one by one. If you have a car with a coil-on-plug system then this is not as much of a worry. Also, most all newer cars make it hard to put parts in the wrong place, but you have to be more careful with most older cars.
Tips:Tools Needed for Spark Plug Replacement
Changing spark plugs is a simple job that just requires a few basic tools. As mentioned above, use a compressed air duster to blow off dirt and debris around the cylinders before spark plug replacement. You should also have a spark park gap tool in case you need to adjust the gap between the electrodes.
Be sure that you have a spark plug socket. It is a socket with a rubber insert to keep the spark plug from breaking during installation and removal.
Are you looking for a reliable manufacturer of down home textile products?
We can quickly provide customers with market analysis, technical support and customized services.
- Ningbo Dongning Tools Co.,Ltd
- Professional Chinese Tools manufacturer on hand tools& automotive tools
- Address
- No.6 Falan Rd,Hengjie Town,Ningbo City,Zhejiang,China
- Phone
- 86-574-88298696 / 86-574-87070383
- info@nbdntools.com
subscription